GLOBAL LASER APPLICATION SOLUTIONSManufacturing · Application · ServiceSpeak to Chengxuan Laser ↗
INDUSTRY SOLUTION / METAL FURNITURE

Consistent fit.
Repeatable finished assemblies.

Coordinate tube and sheet cutting, welding fixtures and surface requirements for furniture frames, display structures and reviewed architectural metal parts.

Metal Furniture & Architectural Metalwork
  • Tables, seating frames and display fixtures
  • Tube-and-sheet furniture assemblies
  • Decorative and architectural metalwork subject to design review
Discuss this production problem ↗
PAIN POINT → PROCESS REVIEW → VERIFICATION

Address the difficult part.

Manufacturer-published workpiece and process photos.
Review the illustrated features on your actual part.

MANUFACTURER APPLICATION PHOTOTube intersections: review end geometry, joint gaps and trial assembly.View original photo ↗
CHALLENGE 01

Tube joints require manual correction.

Why it is difficult
Profile variation, end geometry, hole position and separate cutting steps can accumulate fit-up error.
Proposed solution approach
Review a tube-cutting route with the complete joint drawing, stock range, chucking and support requirements. Confirm the mating parts through a trial assembly.
What to verify
Measure joint gaps, alignment and preparation time on representative frames.
MANUFACTURER APPLICATION PHOTOTube-frame joint reference: review fixturing, diagonals, weld sequence and access.View original photo ↗
CHALLENGE 02

Frames move during welding.

Why it is difficult
Clamping, heat distribution, weld sequence and inconsistent component location can affect geometry.
Proposed solution approach
Match welding tables and fixtures to the frame. Compare handheld, platform or robotic welding only after the joint and loading approach are defined.
What to verify
Check frame diagonals, angles and final geometry before and after welding.
MANUFACTURER APPLICATION PHOTOVisible frame corner: agree seam appearance and the finishing route.View original photo ↗
CHALLENGE 03

Finishing work damages the intended appearance.

Why it is difficult
Visible seams, coatings and decorative surfaces may require different preparation and finishing routes.
Proposed solution approach
Define seam visibility, grinding allowance and coating sequence with material-specific trials and suitable extraction.
What to verify
Review agreed seam appearance, surface condition and finishing time.
MANUFACTURER APPLICATION PHOTODifferent stock and features: include loading and fixture changeover in the production review.View original photo ↗
CHALLENGE 04

Automation does not fit the product mix.

Why it is difficult
Short runs, many variants and difficult loading can leave a high-speed cell waiting between jobs.
Proposed solution approach
Assess fixture changeover, access and the real part mix. Retain manual loading where appropriate and add handling or automation only where justified.
What to verify
Compare total cycle, changeover and operator involvement across the actual product mix.
A MEASURABLE APPLICATION BRIEF

Agree the baseline.
Verify the proposed result.

Record the current process and the actual difficulty. Agree the target, sample, test conditions and acceptance method before comparing equipment.

  • Frame drawings and the profile / tube range
  • Part sizes, seam access and final geometry requirements
  • Finish, coating sequence, variants and batch sizes
  • Current loading, fixtures, changeover and utilities

Build the acceptance plan.

  1. Representative part. Include normal production variation, geometry and surface condition.
  2. Current baseline. Record the defect, rework, process time or utility limitation being addressed.
  3. Agreed test. Identify equipment, fixture, utilities, settings and inspection method.
  4. Documented result. Compare the complete workflow with the agreed acceptance criteria.
Send your industry brief ↗
BEFORE SELECTING THE EQUIPMENT

The application
defines the answer.

Which equipment should we review for this industry?

Starting points include Flat-Push Laser Tube Cutter, 1500W Air-Cooled Laser Welder, Robotic Fiber Laser Welder. They are options for application review, not an instruction to buy every listed machine. The actual part, process, workload and existing equipment determine the selected scope.

What information should we send before a quotation?

Frame drawings and the profile / tube range; Part sizes, seam access and final geometry requirements; Finish, coating sequence, variants and batch sizes; Current loading, fixtures, changeover and utilities. Include a representative drawing or sample where available and the destination country.

Can the proposed solution guarantee a saving or production result?

No fixed improvement is assumed. Record the current process, agree the target and test representative parts under documented conditions. Confirm the selected configuration, acceptance method and supply responsibilities in writing.

General technical context:TRUMPF tube-processing and furniture application reference ↗General process context does not establish Chengxuan configuration performance. Selected-model data, the actual application and test results determine the scope.
MANUFACTURING · APPLICATION · SERVICE

Beyond the machine.
Across the project.

Explore service & support ↗
01 / APPLICATION

Review the process.

Bring the material, part and required result into one clear equipment discussion.

02 / MANUFACTURING

Define the configuration.

Agree the selected equipment, components, integration and acceptance scope.

03 / LIFECYCLE

Plan the support.

Confirm delivery, training, documentation, consumables and after-sales arrangements.

YOUR NEXT LASER APPLICATION

Your application.
Our next conversation.

Discuss your project ↗
↗WhatsApp

Enhanced view

Clarity optimised for viewing. Confirm process results on a representative part.

Download displayed photo ↓Discuss your actual part ↗