GLOBAL LASER APPLICATION SOLUTIONSManufacturing · Application · ServiceSpeak to Chengxuan Laser ↗
LASER CUTTING / EQUIPMENT ENQUIRY

Machine de découpe laser fibre fermée à table échangeable

CX-3015H / 4020H / 6020H / 8020H catalogue family

Ci-joint une bourse de table système de feuille de métal de traitement. La révision de votre feuille de dimensions, le matériau, l'épaisseur et les exigences en matière de chargement.

ADD IT TO YOUR EQUIPMENT PLAN

Review this configuration alongside the equipment and utilities your process needs.

Compare
TECHNICAL REFERENCE

Know the
configuration.

Supplied Chengxuan Laser English Catalogue 2026, PDF page 13

Family-level values are references. Confirm the selected system and application before an order.

Laser power options2000 / 3000 / 4000 / 6000 W
Listed working areas1500 × 3000 / 2000 × 4000 mm
Wavelength1070 nm
Repeat positioning± 0.05 mm
TransmissionScrew and rack drive
CoolingWater-cooled
Electrical supply380 V, 50 / 60 Hz; confirm configuration
Reference machine weight6500 kg
Reference dimensions8150 × 2930 × 2050 mm

Process capability, duty cycle, safety measures, electrical requirements, included accessories and delivery conditions are confirmed for your application. Request the current model-specific documentation with your enquiry.

APPLICATION & PROJECT PLANNING

Make the machine
part of the solution.

Fiber sheet and tube systems, plus CO2 non-metal cutting equipment, selected around stock format, geometry and process requirements.

Laser Cutting Solutions ↗

Useful details for your enquiry.

  • Material grade and thickness range
  • Sheet dimensions or tube section, length and wall thickness
  • Drawing files, nesting needs and required edge quality
  • Daily volume, batch mix and loading method
COMPLETE THE PRODUCTION TASK

The equipment around your machine.

All production packages ↗

Coordinate the fiber cutter, air and gas utilities, cooling, extraction and material workflow. Start from the actual metal, thickness, edge quality and production volume.

Supporting equipmentRole in the packageWhat to confirm
Laser Cutting Air Compressor SystemProcess dependentReview machine pneumatics and approved air-cutting demand. Add a compressor only when the verified factory supply is insufficient.
Compressed Air DryerProcess dependentRequired air treatment depends on the selected machine specification and existing air quality.
Air Filtration and Condensate TreatmentProcess dependentDefine particles, moisture and oil limits together with drying and drainage.
Compressed Air Receiver and DistributionProcess dependentReview peak demand, distribution and whether installed storage already suffices.
Assist and Shielding Gas Supply SystemRequired provisionConfirm the selected assist-gas route, supply quality, pressure and flow. Air, nitrogen and oxygen are process alternatives, not an automatic all-gases bundle.
Industrial Laser Water ChillerProcess dependentSupply water cooling only where required; check whether the machine already includes it.
Application-Matched Fume and Dust ExtractionRequired provisionProvide a process-appropriate extraction and dust-handling arrangement.
Laser Process Enclosure and InterlocksRequired provisionConfirm complete-system guarding and site controls; a separate enclosure may already be integrated.

Questions sur la configuration et le devis

Comment obtenir un prix pour Machine de découpe laser fibre fermée à table échangeable ?

Demandez un devis écrit pour la configuration choisie. Précisez le matériau, le plan ou les dimensions, la charge de travail, les réseaux disponibles et la ville de livraison. Le devis confirme équipements, accessoires, transport et services ; une référence de catalogue ne constitue pas une spécification de commande confirmée.

Demander un devis de configuration

Quels équipements complémentaires examiner ?

Discutez de ces éléments associés dans le cadre du processus de production complet :

Vérifiez la compatibilité, les équipements existants et les fonctions intégrées avant d’ajouter des appareils distincts. Les compléments sont sélectionnés selon l’application ; le devis confirme le fournisseur et le périmètre inclus.

Référence technique: CX-H-ENC · Catalogue PDF, page 13

BEFORE YOU ENQUIRE

A clearer route
to the right machine.

What is the Enclosed Exchange-Table Fiber Laser Cutter?

An enclosed exchange-table system for metal sheet processing. Review your sheet dimensions, material, thickness and loading requirements. Its catalogue family is CX-3015H / 4020H / 6020H / 8020H. The listed power or configuration is 2–6kW and cooling is Water-cooled.

What information is needed to select this machine?

For this laser cutting configuration, share the material, thickness, sheet or tube dimensions, edge requirements and loading method. Include available electrical supply, utilities and the destination country, delivery city or postcode.

Are these specifications confirmed for my order?

The technical table uses family-level references from Supplied Chengxuan Laser English Catalogue 2026, PDF page 13. Confirm the exact model, selected output, electrical supply, accessories and process capability in a written quotation.

Can I request a quotation and a real demonstration?

Yes. Use the product enquiry form or WhatsApp +86 189 7513 5599 to request a quotation and ask about a current demonstration or a material sample test. Availability and test conditions require confirmation. An enquiry does not create an order or collect payment.

FROM CONFIGURATION TO QUOTATION

Bring your part.
Define the complete scope.

Share the material, required process and destination. Add production details and supporting equipment where useful.

What happens next?

  1. Review the application and the selected configuration.
  2. Confirm utilities, included equipment and any sample review.
  3. Agree the quotation, delivery and service scope.
Discuss the part on WhatsApp ↗
TELL US ABOUT YOUR PROJECT

Request a quotation.

Your enquiry is linked to this machine. Share your application so we can confirm the configuration.

SELECTED EQUIPMENTEnclosed Exchange-Table Fiber Laser Cutter
Production details & supporting equipment
Select supporting equipment 0 selected

Choose what you need. Describe existing systems below; selecting an item requests a review and does not add it to an order.

Submitting an enquiry does not place an order or collect payment.

YOUR NEXT LASER APPLICATION

Your application.
Our next conversation.

Discuss your project ↗
↗WhatsApp
🌐 Français