Mitered tube-end opening
Review cut features, end geometry, joint fit and stock presentation.
Current machine photographs are available on request. This technical overview does not present a substitute product image.
See the machine. Discuss the process.Request current photos and a real demonstration↗CX-6012K7 / 6017K7 / 6024K7 catalogue family
Cắt ống với hướng dẫn tải, hoặc tùy chọn một bán tự động nạp bố trí. Thảo luận về các ống phạm vi và xử lý tài liệu.
Review this configuration alongside the equipment and utilities your process needs.
Supplied Chengxuan Laser English Catalogue 2026, PDF page 23
Family-level values are references. Confirm the selected system and application before an order.
| Round / square tube size | 10–120 mm (catalogue) |
|---|---|
| Processing length | Up to 6500 mm |
| Repeat positioning | ± 0.02 mm |
| Acceleration | Up to 1.6 G |
| Remnant length | At least 60 mm |
| Reference dimensions | 8004 × 1212 × 1916 mm |
| With semi-auto rack | 8004 × 1747 × 1916 mm |
Process capability, duty cycle, safety measures, electrical requirements, included accessories and delivery conditions are confirmed for your application. Request the current model-specific documentation with your enquiry.
Fiber sheet and tube systems, plus CO2 non-metal cutting equipment, selected around stock format, geometry and process requirements.
Laser Cutting Solutions ↗Combine tube cutting with the right stock supports, loading, gas and air supply, extraction and unloading arrangement.
| Supporting equipment | Role in the package | What to confirm |
|---|---|---|
| Tube Loading and Support System | Process dependent | Stock support and safe loading are required provisions; a new automatic feeder is an optional implementation. |
| Laser Cutting Air Compressor System | Process dependent | Verify pneumatic and approved air-cutting requirements against the existing supply. |
| Compressed Air Dryer | Process dependent | Select treatment to the machine-required dew point. |
| Air Filtration and Condensate Treatment | Process dependent | Confirm oil, particulate and condensate controls. |
| Assist and Shielding Gas Supply System | Required provision | Select assist-gas type and supply performance for the required material and finish. |
| Industrial Laser Water Chiller | Process dependent | Review integrated or external cooling for the chosen system. |
| Application-Matched Fume and Dust Extraction | Required provision | Review tube-cutting fume capture, ducting and waste handling. |
| Laser Process Enclosure and Interlocks | Required provision | Confirm guarding of the laser process, loading and unloading. |
AI-restored from supplied catalogue photographs for clearer browsing. Compare originals; confirm fine details on your sample.
Review cut features, end geometry, joint fit and stock presentation.
Review cut features, end geometry, joint fit and stock presentation.
Review cut features, end geometry, joint fit and stock presentation.
Review cut features, end geometry, joint fit and stock presentation.
Review cut features, end geometry, joint fit and stock presentation.
Review cut features, end geometry, joint fit and stock presentation.
Yêu cầu báo giá bằng văn bản cho cấu hình đã chọn. Cung cấp vật liệu, bản vẽ hoặc kích thước chi tiết, khối lượng công việc, nguồn điện và tiện ích, cùng thành phố giao hàng. Báo giá xác nhận thiết bị, phụ kiện, vận chuyển và phạm vi dịch vụ; dữ liệu catalogue chưa phải thông số đơn hàng đã xác nhận.
Yêu cầu báo giá cấu hìnhTrao đổi các hạng mục liên quan sau trong toàn bộ quy trình sản xuất:
Kiểm tra khả năng tương thích, thiết bị hiện có và các chức năng đã tích hợp trước khi bổ sung thiết bị riêng. Thiết bị phụ trợ được chọn theo ứng dụng; báo giá xác nhận nhà cung cấp và phạm vi bao gồm.
Tài liệu kỹ thuật tham khảo: CX-K7-TUBE · Catalogue PDF, trang 23
Tube cutting with manual loading or an optional semi-automatic loading layout. Discuss the tube range and material handling. Its catalogue family is CX-6012K7 / 6017K7 / 6024K7. The listed power or configuration is On request and cooling is Confirm configuration.
For this laser cutting configuration, share the material, thickness, sheet or tube dimensions, edge requirements and loading method. Include available electrical supply, utilities and the destination country, delivery city or postcode.
The technical table uses family-level references from Supplied Chengxuan Laser English Catalogue 2026, PDF page 23. Confirm the exact model, selected output, electrical supply, accessories and process capability in a written quotation.
Yes. Use the product enquiry form or WhatsApp +86 189 7513 5599 to request a quotation and ask about a current demonstration or a material sample test. Availability and test conditions require confirmation. An enquiry does not create an order or collect payment.
Share the material, required process and destination. Add production details and supporting equipment where useful.
Your enquiry is linked to this machine. Share your application so we can confirm the configuration.